Stormwater BMPs for Industrial Sector E, Glass Clay Cement Concrete Gypsum Product Manufacturing Facilities, Stormwater Permitting Guide

Industrial Sector E, Glass Clay Cement Concrete Gypsum Product Manufacturing Facilities

stormwater bmps > industrial-sector-e-glass-clay-cement-concrete-gypsum-product-manufacturing-facilities

Common Scale-Based, Non-Structural Stormwater BMPs for Industrial Sector E:

Use dust collection systems (e.g., bag houses) to collect airborne particles generated as a result of mixing operations.
Install sediment basins, silt fence, vegetated filter strips, or other sediment removal measures downstream/downslope.
Remove spilled material and settled dust from paved portions of the facility by shoveling and sweeping on a regular basis.
Train employees in good housekeeping, spill prevention and control, and materials management procedures.
Clean forms in a designated area designed to prevent the discharge of waste materials.
Minimize/eliminate run-on into fueling areas with diversion dikes, berms, curbing, surface grading or other equivalent measures.
Provide curbing or posts around fuel pumps to prevent collisions from vehicles.
Inspect the fueling area for leaks and spills
Clean washwater residue from portions of the site that drain offsite.
Eliminate or reduce the number and amount of hazardous materials and waste by substituting nonhazardous or less hazardous materials.
And More...

Stormwater BMP Applicable SIC Codes for Industrial Sector E:

3211
3221
3229
3231
3241
3251
3253
3255
3259
3261
3262
3263
3264
3269
3271
3272
3273
3274
3275
3281
3291
3292
3295
3296
3297
3299

Common Type-Based, Structural BMPs for Industrial Sector E

Point BMP
- Constructed Wetland
- Infiltration Basin
- Bioretention
- Sand Filter (surface)
- Rain Barrel
- Cistern
- Wet Pond
- Dry Pond
Linear BMP
- Grassed Swale
- Infiltration Trench
- Vegetated Filter Strip
- Sand Filter (non-surface)
Area BMP
- Green Roof
- Porous Pavement

Common Pollutant Sources for Industrial Sector E:

Exposure of lumber, residues, and vehicles/equipment to precipitation
Parts cleaning
Waste disposal of oily rags, oil and gas filters, batteries, coolants, degreasers
Fluid replacement including hydraulic fluid, oil, transmission fluid, radiator fluids, and grease
Diesel fuel

Common Toxicants for Industrial Sector E

Nutrients
- nitrates
Pesticides
- 2,4-D γ -BHC (lindane)
- malathion
- atrazine
- chlordane
- diazinon
Other organics
- VOCs
- 1,3-dichloro-benzene
- anthracene
- benzo(a) anthracene
- benzo(b) fluoranthene
- benzo(k) fluoranthene
- benzo(a) pyrene
- bis (2-ethylhexyl) phthalate
- fluoranthene
- fluorene
- naphthalene
- pentachlorophenol
- phenanthrene
- pyrene
Pathogens
- enteroviruses
- Shigella
- Pseudomonas aeruginosa
- protozoa
Heavy Metals
- nickel
- cadmium
- chromium
- lead
- zinc
- copper
Salts
- chloride

Common Pollutants for Industrial Sector E:

BOD, TSS, oil, and grease
Solvents, oil, heavy metals, acid/alkaline wastes
Oil, heavy metals, solvents, acids
Oil and grease, arsenic, lead, cadmium, chromium, COD, and benzene
Diesel, gasoline, oil

Factors that can affect water quality:

Geographic location
Hydrogeology
Topography
Type, duration, and intensity of precipitation events
Extent of impervious surfaces (e.g., concrete or asphalt)
Type of ground cover (e.g., vegetation, crushed stone, or dirt)
Size of the operation

This site focuses or refers to information and services regarding Technology Based Effluent Limitation (TBEL) Sedimentation Qualified Industrial Storm water Practitioner (QISP) Debris Notice of Non Applicability (NONA) Storm Water Pollution Prevention Plan (SWPPP) Best Available Technology Economically Achievable (BAT) Total Maximum Daily Load (TMDL) Regional Water Board Natural Background Sediment Control BMPs pH Qualifying Storm Event (QSE) New Source Performance Standards (NSPS) Ontario Stormwater Guarantee Sheet Flow Effluent Limitations Guidelines (ELGs) Northern Industrial Sector E Glass Clay Cement Concrete Gypsum Product Manufacturing Facilities Standard Industrial Classification (SIC) Industrial Materials Facility Method Detection Limit Toxicity Stormwater Benchmarks Wattles Third Party Environmental Lawsuit (TPEL) Chain of Custody Industrial General Permit (IGP) Total Dissolved Solids (TDS) Clean Water Act (CWA) Good Housekeeping BMPs Field Measurements Exceedance Response Action (ERA) Stormwater Drainage Non Detect Numeric Action Level (NAL) Non-Governmental Organization (NGO) State water Board Stormwater Storm Water Discharge Associated with Industrial Activity Detected Not Quantifiable United States Environmental Protection Agency (U.S. EPA) Flocculant Socks Effective Date Monitoring Requirements Water Quality Objectives Best Conventional Pollutant Control Technology (BCT) Drainage Area Best Practicable Control Technology Currently Available (BPT) Operator Effluent Legally Responsible Person (LRP) Oil and Grease (O&G) Stormwater Discharge Points Monitoring Implementation Plan Notice of Intent (NOI) Numeric Effluent Limitation (NEL) Storm wattle Erosion Water Quality Based Effluent Limitation (WQBEL) North American Industrial Classification System (NAICS) Numeric Action Level (NAL) Exceedance Total Organic Carbon (TOC) New Industrial General Permit Southern Industrial Sector E Glass Clay Cement Concrete Gypsum Product Manufacturing Facilities Trade Secret Structural Controls Storm Water Multiple Application and Report Tracking System (SMARTS) Plastic Materials Runoff Control BMPs Best Management Practices (BMP) Source Storm Water Systems (SWS) Total Suspended Solids (TSS) Multi Sector General Permit (MSGP) Straw Wattles Non Storm Water Discharges (NSWD) Water Quality Standards State Water Resources Control Board (SWRCB) Quality Assurance/Quality Control (QA/QC) Third Party Environmental Group (TPEG) No Exposure Certification (NEC) Areas of Special Biological Significance (ASBS) Municipal Separate Storm Sewer System (MS4) Scrap Metal Permit Effluent Limitation Wattle Turbidity Discharger Erosion Control BMPs New Source Performance Standards Minimum Level Waters of the United States Storm Wattles National Pollutant Discharge Elimination System (NPDES) Non stormwater Run-on Biochemical Oxygen Demand (BOD) Waste Discharge Identification Number (WDID) Scheduled Facility Operating Hours Industrial Storm wattles Stormwater Permit Sediment New Discharge(r) Notice of Termination (NOT) Division of Water Quality (DWQ) Permit Registration Documents (PRDs) and more.

In addition, stormwater treatment stormwater engineer services stormwater sampling Industrial Sector E Glass Clay Cement Concrete Gypsum Product Manufacturing Facilities stormwater benchmarks stormwater plan of action stormwater hazardous materials business plan Industrial Sector E Glass Clay Cement Concrete Gypsum Product Manufacturing Facilities non-stormwater observation stormwater consultant stormwater regulations penalties stormwater annual report stormwater management services stormwater filtration media stormwater expert witness Industrial Sector E Glass Clay Cement Concrete Gypsum Product Manufacturing Facilities stormwater oil sheen sock stormwater discharge stormwater expert consultation stormwater observation report non-stormwater observation report stormwater mechanical filtration stormwater sand filters united states stormwater record keeping industrial wattle swppp stormwater environmental stormwater compliance audit stormwater regulations Industrial Sector E Glass Clay Cement Concrete Gypsum Product Manufacturing Facilities plastic inlet filter stormwater runoff sampling stormwater vessels health and safety consultation oil solidifying pillows stormwater news Industrial Sector E Glass Clay Cement Concrete Gypsum Product Manufacturing Facilities stormwater safety inspection plan stormwater osha safety and health inspection oil solidifying booms stormwater osha stormwater quarterly observation environmental management stormwater hmbp Industrial Sector E Glass Clay Cement Concrete Gypsum Product Manufacturing Facilities stormwater rain information and more.