Stormwater BMPs for Industrial Sector G, Metal Ore Mining Dressing Facilities, Stormwater Permitting Guide

Industrial Sector G, Metal Ore Mining Dressing Facilities

stormwater bmps > industrial-sector-g-metal-ore-mining-dressing-facilities

Common Scale-Based, Non-Structural Stormwater BMPs for Industrial Sector G:

Keep as much vegetation as possible when excavating and seed as necessary to minimize the amount of exposed soils.
Width and grade of roads should be as small as possible to meet regulatory requirements and designed to match the natural contours of the area.
Use serrated slopes, benched slopes, contouring, and stream alteration around piles for sediment control and runoff dispersion.
Use check dams, rock outlet protection, level spreaders, stream alternation, drop structures, serrated slopes, drain fields, benched slopes, contouring, and stream alteration for runoff dispersion.
If operations are uncovered, perform them on a concrete pad that is impervious and contained.
Promptly transfer used fluids to the proper container; do not leave full drip pans or other open containers around the shop. Empty and clean drip pans and containers.
Use drip pans, drain boards, and drying racks to direct drips back into a fluid holding tank for reuse.
Eliminate or reduce the number and amount of hazardous materials and waste by substituting nonhazardous or less hazardous materials.
If parts are dipped in liquid, remove them slowly to avoid spills
Perform inspection and preventive maintenance on fuel storage tanks to detect potential leaks before they occur.
And More...

Stormwater BMP Applicable SIC Codes for Industrial Sector G:

1021
1011
1021
1031
1041
1044
1061
1081
1094
1099

Common Type-Based, Structural BMPs for Industrial Sector G

Point BMP
- Constructed Wetland
- Infiltration Basin
- Bioretention
- Sand Filter (surface)
- Rain Barrel
- Cistern
- Wet Pond
- Dry Pond
Linear BMP
- Grassed Swale
- Infiltration Trench
- Vegetated Filter Strip
- Sand Filter (non-surface)
Area BMP
- Green Roof
- Porous Pavement

Common Pollutant Sources for Industrial Sector G:

Exposure of lumber, residues, and vehicles/equipment to precipitation
Parts cleaning
Waste disposal of oily rags, oil and gas filters, batteries, coolants, degreasers
Fluid replacement including hydraulic fluid, oil, transmission fluid, radiator fluids, and grease
Diesel fuel

Common Toxicants for Industrial Sector G

Nutrients
- nitrates
Pesticides
- 2,4-D γ -BHC (lindane)
- malathion
- atrazine
- chlordane
- diazinon
Other organics
- VOCs
- 1,3-dichloro-benzene
- anthracene
- benzo(a) anthracene
- benzo(b) fluoranthene
- benzo(k) fluoranthene
- benzo(a) pyrene
- bis (2-ethylhexyl) phthalate
- fluoranthene
- fluorene
- naphthalene
- pentachlorophenol
- phenanthrene
- pyrene
Pathogens
- enteroviruses
- Shigella
- Pseudomonas aeruginosa
- protozoa
Heavy Metals
- nickel
- cadmium
- chromium
- lead
- zinc
- copper
Salts
- chloride

Common Pollutants for Industrial Sector G:

BOD, TSS, oil, and grease
Solvents, oil, heavy metals, acid/alkaline wastes
Oil, heavy metals, solvents, acids
Oil and grease, arsenic, lead, cadmium, chromium, COD, and benzene
Diesel, gasoline, oil

Factors that can affect water quality:

Geographic location
Hydrogeology
Topography
Type, duration, and intensity of precipitation events
Extent of impervious surfaces (e.g., concrete or asphalt)
Type of ground cover (e.g., vegetation, crushed stone, or dirt)
Size of the operation

This site focuses or refers to information and services regarding Water Quality Objectives Permit Registration Documents (PRDs) Stormwater Permit Biochemical Oxygen Demand (BOD) Oil and Grease (O&G) Monitoring Requirements Legally Responsible Person (LRP) Runoff Control BMPs Storm Water Pollution Prevention Plan (SWPPP) Sedimentation Third Party Environmental Lawsuit (TPEL) Turbidity Method Detection Limit Waters of the United States Notice of Termination (NOT) Best Practicable Control Technology Currently Available (BPT) Toxicity Municipal Separate Storm Sewer System (MS4) Multi Sector General Permit (MSGP) Effluent Limitation Total Maximum Daily Load (TMDL) Total Suspended Solids (TSS) New Industrial General Permit Water Quality Based Effluent Limitation (WQBEL) Numeric Effluent Limitation (NEL) Best Available Technology Economically Achievable (BAT) State Water Resources Control Board (SWRCB) Monitoring Implementation Plan Notice of Intent (NOI) Flocculant Socks Total Organic Carbon (TOC) Source Erosion Southern Industrial Sector G Metal Ore Mining Dressing Facilities Industrial General Permit (IGP) Effective Date Field Measurements Technology Based Effluent Limitation (TBEL) Good Housekeeping BMPs Storm Water Discharge Associated with Industrial Activity Sediment Control BMPs Wattle Stormwater Drainage Standard Industrial Classification (SIC) Regional Water Board Exceedance Response Action (ERA) United States Environmental Protection Agency (U.S. EPA) Trade Secret Structural Controls Detected Not Quantifiable Storm Wattles Minimum Level Storm wattle Operator Sheet Flow Stormwater Guarantee Numeric Action Level (NAL) Exceedance Industrial Materials Ontario Areas of Special Biological Significance (ASBS) Scheduled Facility Operating Hours Natural Background Storm Water Multiple Application and Report Tracking System (SMARTS) Sediment New Source Performance Standards Erosion Control BMPs Non Detect Discharger Total Dissolved Solids (TDS) Straw Wattles Non Storm Water Discharges (NSWD) State water Board Stormwater Stormwater Discharge Points New Source Performance Standards (NSPS) Chain of Custody Third Party Environmental Group (TPEG) Best Management Practices (BMP) Qualifying Storm Event (QSE) Clean Water Act (CWA) Waste Discharge Identification Number (WDID) Effluent Quality Assurance/Quality Control (QA/QC) Storm Water Systems (SWS) Industrial Storm wattles Plastic Materials Debris Water Quality Standards Non-Governmental Organization (NGO) Northern Industrial Sector G Metal Ore Mining Dressing Facilities Run-on Non stormwater Scrap Metal Permit Stormwater Benchmarks Numeric Action Level (NAL) National Pollutant Discharge Elimination System (NPDES) North American Industrial Classification System (NAICS) New Discharge(r) Notice of Non Applicability (NONA) Drainage Area Facility No Exposure Certification (NEC) Best Conventional Pollutant Control Technology (BCT) pH Effluent Limitations Guidelines (ELGs) Qualified Industrial Storm water Practitioner (QISP) Wattles Division of Water Quality (DWQ) and more.

In addition, united states stormwater expert consultation stormwater treatment plastic inlet filter stormwater consultant stormwater osha stormwater sampling Industrial Sector G Metal Ore Mining Dressing Facilities stormwater observation report stormwater record keeping stormwater filtration media health and safety consultation stormwater management services stormwater vessels stormwater safety inspection plan stormwater discharge stormwater rain information non-stormwater observation report stormwater osha safety and health inspection stormwater compliance audit stormwater regulations penalties oil solidifying booms stormwater sand filters stormwater environmental stormwater oil sheen sock stormwater expert witness Industrial Sector G Metal Ore Mining Dressing Facilities swppp stormwater hazardous materials business plan Industrial Sector G Metal Ore Mining Dressing Facilities non-stormwater observation stormwater engineer services industrial wattle stormwater news Industrial Sector G Metal Ore Mining Dressing Facilities stormwater annual report stormwater regulations Industrial Sector G Metal Ore Mining Dressing Facilities environmental management stormwater hmbp Industrial Sector G Metal Ore Mining Dressing Facilities stormwater runoff sampling stormwater benchmarks stormwater quarterly observation stormwater mechanical filtration oil solidifying pillows stormwater plan of action and more.